Default Setting
The default setting of microhard P900 module do not match the telemetry setting of flight controller. Holybro P900 Radio have been configured to Point to Point Operating Mode and 57600 Serial Baud Rate in factory. Using these parameters, the Radio communicates successfully with the pixhawk series flight controller. After Firmware Update or resetting the Radio, you need to re-config them as following.
In Point to Point operating modes, there must be a master to provide network synchronization for the system, so one Radio should be configured to PP Master and another should be configured to PP Remote. Refer to <Pico Series P900.Operating Manual.v1.8.7> for the detail information of Radio Configuration.
Export as PDF
Copy link