# F9P Rover Lite ### H-RTK F9P Rover Lite {% hint style="info" %} There are two version available. ***Standard***** version** comes with 10 Pin connector for Pixhawk **GPS1** port. (Connector not compatible with CubePilot)\ \ \&#xNAN;***2nd GPS***** version** comes with 8 pin connector for Pixhawk **GPS2** Port or **GPS2** Port on the CubePilot {% endhint %} This model is low profile, lower cost, and has high performance, It can meet the needs of general DIY users. Due to the lower cost, this model can also greatly minimize the cost of large swarm drone projects such as swarm light shows. It has an integrated safety switch and a tri-colored LED indicator, and it is compatible with the open source *Pixhawk* series flight controller. ![H-RTK F9P Rover lite (SKU12017) H-RTK F9P Rover lite 2nd GPS (SKU12025) ](/files/X4FEfzfy1q4Qp2FEG3uy) --- # Agent Instructions: Querying This Documentation If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question. Perform an HTTP GET request on the current page URL with the `ask` query parameter: ``` GET https://docs.holybro.com/gps-and-rtk-system/f9p-h-rtk-series/standard-f9p-uart/f9p-rover-lite.md?ask= ``` The question should be specific, self-contained, and written in natural language. The response will contain a direct answer to the question and relevant excerpts and sources from the documentation. Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.